You need to control the flow of water through your coils, since the temperature during the night goes down and you do not want to pump the cold water in to your pool.
I am using an electronic temperature control that is used for furnace at home.
There is an NTC component sensor for temperature in this control. We need to bring it out using disordering, then using extra wire to bring this sensor close to one of the coils and taped it to the coil.
This way whenever the temperature of the coil goes over 27 degree it lets the automatic vale opens and hot water get in to the pool.
Make sour that the thermostat is in winter setup to work as temperature increases over your setting the relay switches and the out put of the relay turns on the 24 VDC transformer to activate the automatic valve.
This automatic valve is a ½ inch valve in series with the coils. I bought this 24VAC Electric Solenoid Valve from valves4projects on eBay.
Good occupation here. I truly enjoyed what you had to say.
Thanks, I am glad you enjoyed it.
Great post! I really enjoy your website and how much useful stuff is posted here. I’ll certainly be coming back to keep up with it.
I am brand-new to blogging and actually enjoyed your website. I am going to bookmark your site and keep checking you out. Thanks for sharing.
Thanks for some other informative website. The place else may I am getting that type of info written in such a perfect way? I’ve a undertaking that I’m just now operating on, and I’ve been at the look out for such information.
Good means of explaining, and fastidious paragraph to take data regarding my presentation focus, which i am going to deliver in school.
Feel free to surf to my web blog: